How to use the plumbing fixture calculator
A blank count is not a passing count.
The plumbing fixture calculator is on the site and it is not ready to give you a number. The page at /calculators/plumbing-fixtures says the fixture-ratio tables are being verified, and that you may enter an occupancy and an occupant load now, but the counts appear only after verified ratios are loaded. A blank result is not zero fixtures. It is an unfinished tool. Do not put "per the calculator" on a drawing while the page says provisional.
The method the page describes, and the method to use until the ratios are verified, is the adopted plumbing code. The page cites IBC Section 2902.1 and IPC Table 403.1: water closets, lavatories, drinking fountains, and service sinks from the occupant load and the occupancy, with a default split of the occupants 50/50 and each result rounded up. Confirm that split and those ratios in the adopted code. Jurisdictions amend Chapter 29 often. The fixture guide is the long version. The commercial restroom guide is the room, not only the count. The model IBC is at ICC. The plumbing code is a separate book. Cite the one the city adopted.
How to work while the tool is dark.
Compute the occupant load first, by function, in the occupant load calculator. The fixture page can import that total. A fixture count based on a guessed load is the wrong order. The factor guide is Table 1004.5.
Apply the adopted fixture table yourself, show the arithmetic on the code sheet, and round up. Note the edition. If the tool later leaves the provisional state, rerun the same inputs and reconcile. Do not let a future software update silently change a permitted set.
Accessible fixtures are a second count. A required water closet and an accessible water closet are related and not identical. See accessible plumbing.
The mistake is submitting "fixtures by calculator" with a screenshot of an empty result. Reviewers read that as no calculation.
Confirm the code edition on the jurisdictions page, do the table by hand until the ratios are verified, and upload the set to run a free scan. The scan does not invent fixture math the calculator is still withholding.
This is advisory. It is not a determination by the authority having jurisdiction. Confirm the adopted edition and local amendments before you change a drawing.