ADA reach ranges: forward vs. side, obstructed vs. unobstructed
How 2010 ADA Section 308 changes the high reach from 48 inches to 44 or 46 inches once an obstruction is in the way, and how forward and side approaches differ.
A light switch is drawn at 48 inches above the floor, on the far side of a 22-inch-deep reception counter. The accessibility reviewer writes: "Forward reach over a 22-inch obstruction is limited to 44 inches. 308.2.2." Forty-eight inches would have been fine with a clear approach. It is not fine over that counter.
The two approaches
The 2010 ADA Standards for Accessible Design, also published by the U.S. Access Board, put reach ranges in Section 308. Operable parts have to be within one or more of those ranges (Section 309.3), and they need a clear floor space complying with 305 (Section 309.2). Forward reach and side reach are different rules. Unobstructed and obstructed reaches are different again.
The ADA reach range calculator runs the same limits. The clear floor space and knee and toe clearance guide covers the 30-by-48-inch space and the knee and toe clearance that a forward reach over a counter depends on.
Unobstructed forward reach
Section 308.2.1:
"Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or ground."
If nothing stands between the clear floor space and the control, 15 to 48 inches is the window.
Obstructed high forward reach
Section 308.2.2:
"Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction. The high forward reach shall be 48 inches (1220 mm) maximum where the reach depth is 20 inches (510 mm) maximum. Where the reach depth exceeds 20 inches (510 mm), the high forward reach shall be 44 inches (1120 mm) maximum and the reach depth shall be 25 inches (635 mm) maximum."
Two points get missed. First, the clear floor space has to go under the obstruction at least as far as the reach depth; that is a Section 305 and 306 check as well as a 308 check. Second, once the reach depth is more than 20 inches, the high reach drops from 48 inches to 44 inches, and the depth itself cannot exceed 25 inches. A 46-inch outlet over a 22-inch counter fails. A 44-inch outlet over a 26-inch counter also fails, because 26 inches is past the 25-inch cap.
Unobstructed side reach
Section 308.3.1:
"Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side reach shall be 15 inches (380 mm) minimum above the finish floor or ground."
There are two exceptions. An obstruction up to 10 inches deep is permitted between the clear floor space and the element. Operable parts of fuel dispensers may be 54 inches maximum, measured from the surface of the vehicular way, where the dispensers are installed on existing curbs.
Obstructed high side reach
Section 308.3.2:
"Where a clear floor or ground space allows a parallel approach to an element and the high side reach is over an obstruction, the height of the obstruction shall be 34 inches (865 mm) maximum and the depth of the obstruction shall be 24 inches (610 mm) maximum. The high side reach shall be 48 inches (1220 mm) maximum for a reach depth of 10 inches (255 mm) maximum. Where the reach depth exceeds 10 inches (255 mm), the high side reach shall be 46 inches (1170 mm) maximum for a reach depth of 24 inches (610 mm) maximum."
The obstruction itself is capped at 34 inches high and 24 inches deep. A 36-inch-high counter used for a side reach is already over the cap, before the control height is checked. Past a 10-inch reach depth, the high side reach drops from 48 inches to 46 inches, out to a 24-inch maximum depth. That is a different cutoff than the forward-reach pair of 20 inches and 44 inches.
Two exceptions are written into 308.3.2: the top of washing machines and clothes dryers may be 36 inches maximum above the finish floor, and the same 54-inch fuel-dispenser exception that appears in 308.3.1 applies here.
Operable parts and the children's table
Section 309.4 requires operable parts to be usable with one hand, without tight grasping, pinching, or twisting of the wrist, and with 5 pounds (22.2 N) maximum activating force, with a narrow exception for gas pump nozzles. Height is only one of the checks.
Advisory 308.1 includes a table of children's reach ranges by age, for elements designed primarily for children. The advisory presents that table as guidance. Accessible elements designed for adult use, or for children over age 12, still have to meet the adult ranges in 308. The calculator shows the children's table and does not enforce it.
What the 2010 ADA Standards do not settle here
Buildings permitted under the International Building Code also have to meet the ICC A117.1 edition that the adopted IBC references. This post does not quote A117.1. Some element-specific sections of the ADA Standards also set their own heights, such as the toilet paper dispenser in 604.7. Confirm the standard the authority having jurisdiction enforces. See IBC, ADA, and ICC A117.1: which accessibility rule applies.
Check the control
The ADA reach range calculator applies 2010 ADA 308 to a forward or side reach, with or without an obstruction, including the washer and dryer and fuel-dispenser exceptions. It notes, but does not calculate, the knee and toe clearance under a forward-reach obstruction; use the clear floor space guide for those dimensions. Restroom accessories that have their own section, such as a toilet paper dispenser, belong in the accessible water closet calculator.
On the drawings
- State whether the approach is forward or parallel, and dimension the reach depth over any obstruction.
- For a forward reach over a counter or lavatory, show clear floor space extending under the element at least as far as that reach depth, with knee and toe clearance.
- Dimension obstruction height as well as depth on a side reach; 34 inches and 24 inches are caps, not targets.
- If you rely on an exception (a 10-inch-deep side obstruction, a 36-inch washer or dryer top, or a fuel dispenser on an existing curb), label it.
Run a free scan on your plans. A control that is within 48 inches in the open, but too high over a counter, is the kind of comment the scan can surface before a reviewer does.
This is advisory. It is not a determination by the authority having jurisdiction. Confirm the adopted accessibility standard, its edition, and any local amendments before you change a drawing.