Everything you need to know about InstaPreView — from what it checks to how points work.
The basics
InstaPreView is an automated code-compliance pre-review for building plans. Upload a plan set and it checks the drawings against the adopted building codes for your jurisdiction, then returns a findings report you can act on before you submit to the authority having jurisdiction (AHJ).
It’s a check you run before official submittal. It surfaces likely code issues — the kind that draw plan-review comments and rejections — so you can fix them up front and reduce back-and-forth with the building department. It is not the official review and it does not issue permits.
Architects, engineers, and design professionals preparing plan sets for permit submittal. It’s also for individuals working with a design professional — homeowners, property owners, developers, and contractors who want to catch compliance issues early, walk into conversations with their architect or engineer better informed, and reduce avoidable back-and-forth with the building department before submittal.
It follows the codes adopted by your jurisdiction. Building-code adoption happens at the state and local level, so the exact set that applies to your project depends on where you’re building. That can include model codes like the IBC, IRC, IFC, IPC, IMC, and IECC, the National Electrical Code, accessibility standards such as ICC A117.1 and the ADA, and the referenced structural and life-safety standards those codes incorporate — along with any state or local amendments. When you select your jurisdiction, InstaPreView reviews against the codes of record adopted there.
The Authority Having Jurisdiction — the building department or official body that reviews your plans and issues the permit. InstaPreView helps you prepare for their review; it doesn’t replace it.
Accuracy & what it is (and isn’t)
InstaPreView flags likely compliance issues against the adopted codes for your jurisdiction. In real use, its findings have lined up with comments later issued by building departments. Treat it as a powerful first pass that catches issues early — not as a guarantee.
No. No pre-review can guarantee approval. The AHJ makes the official determination. InstaPreView reduces the chance of avoidable rejections by catching issues before you submit.
No. InstaPreView is a tool that supports the design professional. It does not replace professional judgment, a licensed design professional’s responsibility, or the AHJ’s official review.
Findings are based on the adopted codes and what the model can read from your drawings. If a sheet is ambiguous or a code basis differs, you may disagree — use your professional judgment. Clear, well-labeled drawings produce better findings.
Using it
Your plan set as a PDF. Clearer, text-based, well-labeled sheets yield better extraction and findings than low-resolution scans. The uploader also accepts DXF, DWG, and RVT files, up to 250 MB.
Most scans complete in a few minutes depending on the size of the set. You’ll see progress while it runs, and the report appears when it’s done.
A findings report: a readiness score, the individual findings with the code basis behind each, and the detail you need to address them before submittal.
Coverage is jurisdiction-specific and expanding. You select your jurisdiction when you run a scan. If yours isn’t listed, you can still run a nationwide review against the model codes. See supported jurisdictions.
Run the nationwide review for a model-code baseline. Local adoptions (amendments, edition years) are added over time.
InstaPreview works from the codes of record for your jurisdiction. Corpus-verified adopted codes are authoritative; codes merely declared on your cover sheet are treated as provisional, and a mismatched edition year on your sheets is surfaced as a finding rather than silently accepted.
Pricing & billing
The first 10 findings of every review are free. A full report is $49 (up to 40 pages). Packs are $100 for 5, $185 for 10, and $400 for 25. Firm plans are $999 per month or $9,588 per year. Enterprise pricing is custom. See the Pricing page.
The Firm plan is $999 per month or $9,588 per year ($799 per month effective). It includes 65 scans per month, up to 60 pages per scan, team seats, saved jurisdiction profiles, and priority processing. See the Firm plan.
Yes — the monthly Firm subscription can be cancelled from your account. Cancelling stops future renewals. See the Pricing page and your account settings.
Reach out via the contact page and we’ll work with you. The Terms of Service describe when a scan, pack, or subscription fee is non-refundable.
The arcade & points
A set of quick games in InstaPreView. Playing earns points, and points can be redeemed toward scans — a fun way to earn a free pre-review.
You earn points by playing. Your balance shows on your dashboard, and points can be redeemed for scan credit. Scoring is tracked server-side.
Accumulate enough points in the arcade to redeem for a scan. Your current balance and what it’s worth are shown in your dashboard.
Account & data
Sign up on the site with your email (or available SSO options). You’ll need an account to run scans and track your reports and points.
Your uploads are used to produce your report. Don’t upload anything you’re not authorized to share. See our Privacy Policy for the full statement.